Welcome to Nordon Gasket & Packing High Quality Gasket Materials, Seals &
Gaskets for Automobile and Industrial Applications
    Home     |     About us   |     Products      |     Online Inquiry     |     Contact us      |     Site Map
Spiral wound gasket
Ring Joint Gaskets
Non Metallic Gaskets
Gland Packing & Compression Packing
Graphite Sheet Gaskets
Non Asbestos Sheet,Compressed Jointing
Non Asbestos Sheet,Beater Jointing
Asbestos Sheet Compressed Jointing
PTFE & Expanded PTFE
Cylinder Head Gasket Sheet
Rubber Sheet & Roll
Ceramic Fiber and Fibergalss

Nordon Gasket & Packing Co.,LTD.
Address : No.227,Yuping Road,Taohua Industry Park,Hefei 230601,China.
TEL :86-551-63825311
FAX :86-551-63825312
E-mail : info@gasket-material.com
Skype: gasketmaterial

NGP-PA350 Aramid Fiber Packing
It is a braided packing made of Aramid fiber. This packig can bear higher-pressure applications than other types of braided packings. Due to its steel-like strength, this yarn can be employed separately or as back-up rings with other types of packing. This packing has been developed to replace asbestos packing for pump systems. It covers all the service ranges which asbestos packing provides and even much better. It affords longer service life under severe conditions which conventional asbestos packing can not provide satisfaction, such as sand slurry, tin mining, paper slurry, feed water pump of power stations, etc.

Spec:3.0mm - 50mm


 

table

Pressure

Mpa

3

10

20

Temperature

íŠ

-100~280

Linear speed

M/s

25

1.5

2

PH range

2~13


 


NGP-PA351 Kevlar Packing with PTFE
It is braided packing made of Aramid Fiber yarns impregnated with PTFE dispersion and treated with lubricant. This packing can bear higher-pressure applications than tother types of braided packing. Due to its steel-like strength, this yarn can be employed separately or as back-up rings with other types of packing. This packing has been developed to replace asbestos packing for pump systems. It covers all the service ranges which asbestos packing provides and even much better. It affords longer service life under severe conditions which conventional asbestos packing can not provide satisfaction, such as sand sultry, feed water pump of power stations, etc.
Spec:3.0mm - 50mm


 

table

Pressure

Mpa

3

10

20

Temperature

íŠ

-100~280

Linear speed

M/s

25

1.5

2

PH range

2~13

 

NGP-PA352
Corner PTFE and Kevlar Packing
PTFE Kevlar Composite braided packings was made of PTFE yarns and the reinforced Aramid of Aramid fiber. This structure, Enhances the lubricability of Aramid and reinforces the strength of the pure PTFE packings.
PTFE Kevlar Rope is made of synthetic composite, Aramid and reinforces the strength. finished braiding packings. Aidmer76-020/020B was special processed This special combination packings uses in the sealing of high pressure piston pump.

NGP-PA353
Corner Graphite PTFE and Kevlar Packings
high tensile strength aramid fiber and graphite impregnated PTFE self-lubricating fibers diagonally positioned and braided to produce a low friction, wear-resistant packings.Graphite PTFE Kevlar packings is is recommended for rotary, centrifugal, and reciprocating applications
 
Copyright (c) gasket-material.com All Rights Reserved.